|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Delivery Time:||10 WEEKS|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 SETS PER MONTH|
|Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source:||Steam / Electrical / Natural Gas / Diesel / Etc|
|Capacity:||10-10000kg Per Hour||Water Evaporation:||5-5000kg Per Hour|
spray drying plant,
spray drying equipment
Performance characteristics of used spray dryer for sale
1.Drying speed is fast, solid-liquid surface area greatly increased after the spraying in the hot air flow, the moment
can be evaporated moisture of 95% -98%, and only a few seconds to complete the drying time, especially for
heat-sensitive materials drying.
2.The product has good uniformity, mobility and solubility products of high purity, good quality.
3.The production process is simplified, convenient control. For special materials for a moisture content of
40-60% (90%) of the liquid can be dried into a powder or grain products, after drying without crushing
and screening, to reduce the production processes, to improve product purity.
4.On product particle size, bulk density, moisture, within a certain range by changing the operating conditions to
adjust, control and management is easy.
Technical Requirements of used spray dryer for sale
The drying speed is high when the material liquid is atomized, the surface area of the material will increase greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality. The production procedures are simple and the operation and control are easy. The liquid with moisture contents of 40-60% (for special materials, the contents might be up to 90%.)can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition within a certain range.
ed centrifugal sprayer on the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through very short time of contacting the heat air, the materials can be dried into the final products. The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
|Inlet temperature||≤ 350°C|
|evaporate capacity (kg/h)||5||25||50||100||150||200-3000|
|driving type||compressed air drive||mechanical drive|
|diameter of atomizer tray (mm)||50||120||120||120||150||180-340|
|heating source||electricity||electricity||electricity +steam+fuel oil+coal gas||electricity +steam||electricity +steam+fuel oil+coal gas||To be solved by users|
|Electric-heating power (kw)||9||45||60||81||99|
|Dried powder recovery rate (%)||≥ 95||≥ 95||≥ 95||≥ 95||≥ 95||≥ 95|
|Installation size||A(mm)||1000||1290||1730||2500||2800||according to practical needs|
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)