Home ProductsAir Stream Dryer

SGS Standard Air Stream Spin Ryonet Flash Dryer Micro Negative Pressure Operation

SGS Standard Air Stream Spin Ryonet Flash Dryer Micro Negative Pressure Operation

  • SGS Standard Air Stream Spin Ryonet Flash Dryer Micro Negative Pressure Operation
SGS Standard Air Stream Spin Ryonet Flash Dryer Micro Negative Pressure Operation
Product Details:
Place of Origin: CHINA
Brand Name: XSG
Certification: CE / UL / SGS / EAC / CR – TU
Model Number: YIBU
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: Woodencase
Delivery Time: 10weeks
Payment Terms: L/C, T/T
Supply Ability: 20 SETS PER MONTH
Contact Now
Detailed Product Description
Metal Material: SUS316/SUS304/ CARBON STEEL ,ETC Heating Source: Steam / Electrical / Natural Gas / Diesel / Etc
Temperature: 100-500℃ Capacity: 200-8000kg/h
Water Evaporation: 10-2000kg/h Power: Customized
High Light:

hot air dryer

,

spin flash dryer

 Flash Drying Machine (Spin Flash dryers ) (Rotating flash Dryer)( Flash cooler )

 

Preface

Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements.

Feed system

The feed system consists of a feed vat where a discontinuous flow of product is buffered and fragmented by an agitator prior to continuous drying. A variable speed feed screw (or pump in the case of fluid feed) forwards the product to the drying chamber.

 

Drying chamber

The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Hot air is supplied by a temperature-controlled air heater and speed-controlled fan, entering the drying chamber at a tangent in order to establish a turbulent, whirling air flow.

Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.

The drying chamber is rigidly designed to withstand pressure shock in the event of explosive combustion of flammable particles. All bearings are effectively protected against dust and heat.

 

Bag filter

Powder from the drying chamber is collected in bag filter, while the outlet airleaves the system at the top via a suction fan.

Pneumatic coolers are a simple and reliable method of cooling and conveying dried product. In many instances ambient air will achieve the desired cooling duty. Where required, greater cooling capacity and a finer degree of control can be achieved with conditioned air at a controlled humidity and temperature.

 

Feature :

1. This machine combines the whirl technology with the fluidity, ejection and smashing step technologies.

2. The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realized that " small equipment can perform the large production".

3. The drying capacity for this machine is big but its energy consumption is low. Its heat efficiency is high.

4. The material stay time is very short. The quality of the final products is very good. The machine can be used for drying the heat sensitive materials.

5. For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution.

6. High drying efficiency providing low energy costs

7. Continuous processing with short processing time

8. Low operator overheads and minimum maintenance costs

9. Controlled residence time enabling high temperature drying

10. Available in cGMP compliant configurations

spec Barrel diameter(mm) Main machine dimensions(mm) Main machine power ( kw )

air velocity

( m3/h )

Water evaporation capacity ( Kg/h )
XSG-2 200 250×2800 5-9 300-800 10-20
XSG-3 300 400×3300 8-15 600-1500 20-50
XSG-4 400 500×3500 10-17.5 1250-2500 25-70
XSG-5 500 600×4000 12-24 1500-4000 30-100
XSG-6 600 700×4200 20-29 2500-5000 40-200
XSG-8 800 900×4600 24-35 3000-8000 60-600
XSG-10 1000 1100×5000 40-62 5000-12500 100-1000
XSG-12 1200 1300×5200 50-89 10000-20000 150-1300
XSG-14 1400 1500×5400 60-105 14000-27000 200-1600
XSG-16 1600 1700×6000 70-135 18700-36000 250-2000

Principle 

  1. YIBU Spin Flash dryers are designed for continuous drying of cohesive and non-cohesive pastes and filter cakes, as well as high-viscosity liquids. The main components in an YIBU Spin Flash plant are a feed system, the patented drying chamber and a bag filter. Widely acclaimed by customers in a variety of industries all over the world, this patented process provides a faster and more energy-efficient alternative to spray drying. With more than 150 YIBU Spin Flash dryer installations world-wide YIBU DRYING combines experience and cutting-edge technology into added-value solutions for our customers. Elevated drying temperatures can be used with many products since the flashing off of surface moisture instantly cools the drying gas without appreciably increasing the product temperature which may damage its quality.
  2. Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements.
  3. The feed system consists of a feed vat where a discontinuous flow of product is buffered and fragmented by an agitator prior to continuous drying. A variable speed feed screw (or pump in the case of fluid feed) forwards the product to the drying chamber.
  4. The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Hot air is supplied by a temperature-controlled air heater and speed-controlled fan, entering the drying chamber at a tangent in order to establish a turbulent, whirling air flow.
  5. Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.

The drying chamber is rigidly designed to withstand pressure shock in the event of explosive combustion of flammable particles. All bearings are effectively protected against dust and heat.

 

Contact Details
Changzhou Yibu Drying Equipment Co., Ltd

Contact Person: jennywang

Tel: +8613776887793

Send your inquiry directly to us (0 / 3000)

Other Products

Contact

Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)

Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)