|Place of Origin:||China|
|Certification:||ISO9001 , ISO14001, SGS . CE , UL Certificate|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||45-60 days|
|Supply Ability:||28 set per year|
|Material:||Sus304 Or SUS316l||Be Used For:||Foodstuff Industry|
|Be Specialized In:||Main Machine Material|
fluid bed granulator,
dry granulation machine
Fluidizing dryer is also called fluid bed. Through operation and improvement over 30 years, it has play an active part in the fields of pharmaceutical, chemical, foodstuff, gain and so on industries. It consists of air filter, fluid bed, cyclone separator, dust collector, high-speed centrifugal fan, control cabinet and so on. Because of the difference of property from raw material, it is necessary to equip dust remover in accordance with practical needs. It may select cyclone separator and dust collector both or one of them. In general, cyclone separator can be selected if the raw material is larger and the dust collector may be selected if the raw material is light. Moreover, there is pneumatic feeding device for your selection. There are two kinds of operation for this machine, continuous and intermittent type.
The clean and hot air enters into fluid bed through distributor of valve plate. The wet material is fed from the feeder forms the fluid state by hot air. Because of the wide contact between hot air and raw materials, the time of drying is short. If use continuous type, the material enters from the front of bed, fluidized in bed for several minutes, and float another side of bed. The machine works in negative pressure.
The drying capacity is measured based on the primary moisture of crystal of plum is 20% and its final moisture is 5% and the temperature of air inlet is 130℃.The drying capacity of other raw materials will be based on the practical drying condition. When choose models, please note that: Model A should be matched with cyclone separator and Model B with inside bag dust collector and Model C with cyclone separator and bag dust collector.
The structure of Horizontal Fluid Bed Dryer is of round so as to avoid dead corner. Inside the hopper there is a stirring device in order to avoid agglomeration of raw material and forming canal of flow. The granule is discharged through the method of turning over. It is very convenient and full. The discharged system can be designed as request.
It is operated at the conditions of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient for cleaning. It is an ideal equipment that is in conformity with the requirements of GMP.
The drying speed is fast and the temperature is uniform. The drying time is 20-30 minutes normally.
The electronic systems and their safety should comply with the requirements set forth in 21 CFR Part 11 and GMP Annex 11;The data should be collected at appropriate time intervals and stored in the system in a fixed format that can be printed out/read;
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)