|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Delivery Time:||6 weeks|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 SETS PER MONTH|
|Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source:||Steam / Hot Water / Thermal Oil|
vacuum drying equipment,
vacuum spray dryer
The machine is suitable for pharmaceutical and other industrial materials for mixing of dry granule, the mix of good fluidity of powder and granule, the effect is remarkable.
The mixing barrel unique structure, high mixing efficiency, no dead angle, uniform mixing.
SZG Series Conical Vacuum Dryer is a new generation of drying device developed by our company on the basis of combining the technology of similar equipment. It has two connecting ways, belt or chain. Therefore it is stable in operation. The special design guarantees two shafts to realize good concentricity. Heat medium and vacuum system all adopt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control.
As a specialized company in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you. The biggest may be 8000L.
Let heat source (for example, low pressure steam or thermal oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell;
Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can be realized;
The raw material is under vacuum. The drop of steam pressure makes the moisture (solvent) at the surface of raw material reach the state of saturation and evaporate. The solvent will be discharged through vacuum pump and recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.
|height of rotating frame||mm||1810||1910||2090||2195||2500||2665||2915||3055||3330||4210||5350|
|design pressure inside tank||MPa||-0.09-0.096|
|design pressure inside jacket||MPa||0.3|
When oil is used to heat, use automatic constant temperature to control. It can be used for drying biology products and mine.
Its temperature of operation can be adjusted form 20 -160℃. Compared to ordinal dryer, its heat efficiency will be 2 times higher. The heat is indirect. So the raw material can not be polluted.
It is in conformity with the requirement of GMP. It is easy in washing and maintenance.
The electronic systems and their safety should comply with the requirements set forth in 21 CFR Part 11 and GMP Annex 11;
The data should be collected at appropriate time intervals and stored in the system in a fixed format that can be printed out/read;
(solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be
realized within a short time.
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)