|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Delivery Time:||6 weeks|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 SETS PER MONTH|
|Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source:||Steam / Hot Water / Thermal Oil|
Ss316 Microwave Vacuum Dryer,
rotary double cone vacuum dryer,
300℃ Microwave Vacuum Dryer
1. Material that cannot undertake high temperature.
2. Material that is easy to oxidize.
3. Material that do not permit to destruct.
4. To recover material with residual volatile.
5. Material with vigorous irritative and toxicity.
6. Biology products and mine.
7. Dry raw materials of pharmaceutical industry, chemical industry, foodstuff industry, dyestuff industry and biochensistry at low temp etc.
1. Feed powder or granule into twin cone containers through vacuum transmission or manual.
2. With continuous rotation of container, material will make complex impacting motion in the container and reach to uniform mixing.
3. Energy saving, easy to operate, low labor strength, high work efficiency.
4. Automatic constant temperature control, can be adjusted from 20~200 and within ±2.
5. Compared with ordinal drier, its heat efficiency will be over 2 times.
6. The heat is indirect, so the raw material can not be polluted.
7. Easy in washing and maintenance.
Model SZG double cone rotating vacuum drier has double cone ratating tank.Under the state of vacuum inside the tank,pass steam or hot water into to jacket for heating. The energy can contact with the damp raw material through the inner wall. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat.Because the inner of tank is in the state of vacuum and the raw material is turned over all the time caused by the rotating of tank,the dry speed of raw material is quickened and drying efficiency is raised too and the purpose of uniform dry can be raised.
Cosmetic powder double cone vacuum dryer, the machine can mix and dry the powder, crystal material and granule material in chemical industry, pharmaceutical industry, foodstuff industry, metallurgy industry, construction, etc. It can also be used for the concentration of the liquor, disinfection and germicide of the material. The moisture of the material can be dried to be lower than 0.5%.Themachine can save energy sources with low labor and high efficiency, and it only needs 2-4 hours to dry the material (<40% humidity content).
Put the material in the vacuum and heat the material indirectly by the fixture coat.When dried, it rotates slowly, and refreshes the heating surface continuously to enhance the dry speed. The vacuum pump can absorb the moisture continuously and the steam impregnate can be reclaimed by the cooler.
|Total volume (L)||100||350||500||750||1000||1500||2000|
|Loading volume (L)||≤50||≤175||≤250||≤375||≤500||≤750||≤1000|
|Rotary speed (r/min)||3-13|
|Motor power (kw)||0.75||1.1||1.5||2||3||3||4|
|Rotary height (m)||1.75||2.1||2.25||2.49||2.8||2.94||2.99|
|Tank inner pressure (Mpa)||-0.1-0.15|
|Clip set pressure (Mpa)||≤0.3|
|Working temp.(°C)||Inner tank ≤85 Clip set≤ 140|
|Heating media||Steam, Hot water, Heat transfer oil|
|Floor area (L*W)||2160*800||2260*800||2350*800||2550*1000||2860*1300||3260*1400||
1. Please choose the suitable model according to the primary moisture content, final moisture content, temperature, vacuum degree, and drying time. The heat source can use steam, hot water, thermal oil, and electricity. If the customer required increasing the drying capacity by add more trays, please specify in the order.
2. If the customer required installation or spare parts, please specify in the order.
3. Customized design service available.
4. We guarantee the quality of the dryer and we ensured the spare parts for the dryer is available in a long term.
Features of Rotary Vacuum Dryer
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)