|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 SETS PER MONTH|
|Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source:||Steam / Electrical / Natural Gas / Diesel / Etc|
hot air dryer,
rotating drum dryer
spin flash drying machine DescriptionXSG series rotary flash drying machine is my factory in the introduction, absorption, on the basis of foreign advanced technology, successfully developed a new type of drying equipment. This advanced technology, reasonable design, compact structure, wide scope of application, large production capacity, products of good quality and high efficiency, energy saving, in a dry equipment, crushing, sieving one-time completed, eliminate the pollution of the environment, the whole machine performance reached the international advanced technology level.
The feed system consists of a feed vat where a discontinuous flow of product is buffered and fragmented by an agitator prior to continuous drying. A variable speed feed screw (or pump in the case of fluid feed) forwards the product to the drying chamber.
The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Hot air is supplied by a temperature-controlled air heater and speed-controlled fan, entering the drying chamber at a tangent in order to establish a turbulent, whirling air flow.
Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.
The drying chamber is rigidly designed to withstand pressure shock in the event of explosive combustion of flammable particles. All bearings are effectively protected against dust and heat.
Powder from the drying chamber is collected in bag filter, while the outlet airleaves the system at the top via a suction fan.
Pneumatic coolers are a simple and reliable method of cooling and conveying dried product. In many instances ambient air will achieve the desired cooling duty. Where required, greater cooling capacity and a finer degree of control can be achieved with conditioned air at a controlled humidity and temperature.
1. This machine combines the whirl technology with the fluidity, ejection and smashing step technologies.
2. The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realized that " small equipment can perform the large production".
3. The drying capacity for this machine is big but its energy consumption is low. Its heat efficiency is high.
4. The material stay time is very short. The quality of the final products is very good. The machine can be used for drying the heat sensitive materials.
5. For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution.
6. High drying efficiency providing low energy costs
7. Continuous processing with short processing time
8. Low operator overheads and minimum maintenance costs
9. Controlled residence time enabling high temperature drying
10. Available in cGMP compliant configurations
|spec||Barrel diameter(mm)||Main machine dimensions(mm)||Main machine power ( kw )||
( m3/h )
|Water evaporation capacity ( Kg/h )|
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)