|Place of Origin:||China|
|Certification:||ISO9001, ISO14001 , CE , SGS , UL CERTIFICATE|
|Minimum Order Quantity:||1 ser|
|Packaging Details:||Wooden case|
|Delivery Time:||65 working days|
|Payment Terms:||LC , TT|
|Supply Ability:||28 SETS/ YEAR|
|Application:||Foodstuff / Chemical / Pharmaceutical||Temp:||50-180℃|
|Heating Source:||Steam / Electrical / Natural Gas / Diesel / Etc;||Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC|
|Document:||FAT/ IQ / OQ / PQ|
wet granulator machine,
dry granulation machine
Applications of FL series pharmaceutical fluid bed granulator:
1. Powder granulation or agglomeration in Food, Chemical and Phamaceutical products;
2. Capacity: 3-1000 kg/batch;
4. GMP design;
5. Heat source: steam, electricity, thermal oil etc.
1. cGMP Design: 150 grit exterior finish, mirror finish on internal surfaces. The system can meet GMP standard;
2. HEPA air filter: The air filter consists of primary stage, secondary stage and high efficiency stage air filter and the air cleanness can reach 100,000 grade;
3. Automatic pneumatic sealing: two pneumatic cylinders lift the granulation bowl for sealing with the top chamber; the inflated square rubber ring will seal the bottom chamber to create a completely sealed granulation chamber;
4. Two-bag-filter-chamber system: The top bag filtering system has two chambers which work alternately to avoid air pressure onto the filter bag. The product rate can reach 99%.
5. Accurate air flow control: The exhaust fan is combined with Siemens inverter to accurately control the air flow rate for achieving perfect fluidization.
6. Good working condition: The whole system is working under negative pressure, so there is no powder leaking at all. Exhaust fan is equipped with silencer as well as isolated installation, the noise is below 75 dB(A).
7. Safety measures: The whole system adopts following measure to 100 % make sure safety during operation:
1) Function interlocked: All the function buttons in the control panel are interlocked (only proper operation steps can run the system) to prevent any mistakable operation to the machine.
2) Explosion proof: Granulation chamber is equipment with venting. When the pressure inside the chamber is getting higher than the rated one (say 2 bar), the rupture membrane will break to release the pressure.
3) Pressure monitoring: Pressure sensor is equipped to monitor pressure change inside the granulation chamber. When pressure is getting higher (especially when the bag filter is choked) and positive pressure condition is formed, electrical heater and exhaust fan will stop automatically and pressure release valve will open.
The powder granule in vessel (fluid bed) appears in the state of fluidization. It is preheated and mixed with clean and heated air. At the same time the solution of adhesive is sprayed into the container. It makes the particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.
|Power of fan(kw)||3||4||5.5||7.5||11||15||18.5||18.5||22||30||37|
|Noise,db(A)||(fan is installed separately)≤75|
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)