|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Delivery Time:||6 weeks|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 SETS PER MONTH|
|Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source:||Steam / Hot Water / Thermal Oil|
vacuum drying equipment,
vacuum rotary dryer
Rotary Vacuum Dryer Feature:
* When oil is used to heat,use automatic constant temperature control. It can be used for drying biology products and mine its temperature of operation can be adjusted form 20º C-160º C and within ± 2º C .
* Compared to ordinal dryer, its heat efficiency will be 2 times higher.
* The heat is indirect. So the raw material can not be polluted.
* It is in conformity with the requirement of GMP. It is easy in washing and maintenance.
Rotary Vacuum Dryer Working Principle:
When oil is used to heat, use automatic constant temperature to control. It can be used for drying biology products and mine.
Its temperature of operation can be adjusted form 20 -160℃. Compared to ordinal dryer, its heat efficiency will be 2 times higher. The heat is indirect. So the raw material can not be polluted.
It is in conformity with the requirement of GMP. It is easy in washing and maintenance.
The electronic systems and their safety should comply with the requirements set forth in 21 CFR Part 11 and GMP Annex 11;
The data should be collected at appropriate time intervals and stored in the system in a fixed format that can be printed out/read;
(solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be
realized within a short time.
The machine is suitable for drying and mixing powder or granule raw material of pharmaceutical industry, foodstuff industry and chemical industry and so one especially it is suitable for the following raw materials that have special requirements:
1. Material that cannot undertake high temperature.
2. Material that is easy to oxidize.
3. Material that do not permit to destruct.
4. To recover material with residual volatile.
5. Material with vigorous irritative and toxicity
|Heating area||m 2||1.16||1.5||2||2.63||3.5||4.61||5.58||7.5||9.6||13.8|
|Height of rotating frame||mm||1810||1910||2090||2195||2500||2665||2915||3055||3330||4210|
|Design pressure inside tank||Mpa||-0.09~0.096|
|Design pressure inside jacket||Mpa||0.3|
SZG Series Conical Vacuum Dryer is a new generation of drying device developed by our company on the basis of combining the technology of similar equipment. It has two connecting ways, belt or chain. Therefore it is stable in operation. The special design guarantees two shafts to realize good concentricity. Heat medium and vacuum system all adopt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control.
As a specialized company in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you. The biggest may be 8000L.
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)