KimHello, I got the goods this morning. Very good quality. Thank you so much for doing business with me and you are so patient and clear on explanation.
Johnny CisnerosOne of the great positives in working with you and the company you work for is your response back to emails and your professionalism.
Lithium Iron Phosphate Double Cone Dryer Thermal Oil Heating
|Metal Material||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source||Steam / Hot Water / Thermal Oil|
phosphate double cone dryer,
lithium iron double cone dryer,
SUS304 double cone dryer
Lithium iron phosphate SZG Series powder double-Conical rotating Vacuum Drying Machine for chemical industry (Vacuum Double cone dryer ) (Vacuum machine)( Conical drying machine )
Model SZG double cone rotating vacuum drier has double cone ratating tank.Under the state of vacuum inside the tank,pass steam or hot water into to jacket for heating. The energy can contact with the damp raw material through the inner wall. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat.Because the inner of tank is in the state of vacuum and the raw material is turned over all the time caused by the rotating of tank,the dry speed of raw material is quickened and drying efficiency is raised too and the purpose of uniform dry can be raised.
Cosmetic powder double cone vacuum dryer, the machine can mix and dry the powder, crystal material and granule material in chemical industry, pharmaceutical industry, foodstuff industry, metallurgy industry, construction, etc. It can also be used for the concentration of the liquor, disinfection and germicide of the material. The moisture of the material can be dried to be lower than 0.5%.Themachine can save energy sources with low labor and high efficiency, and it only needs 2-4 hours to dry the material (<40% humidity content).
Put the material in the vacuum and heat the material indirectly by the fixture coat.When dried, it rotates slowly, and refreshes the heating surface continuously to enhance the dry speed. The vacuum pump can absorb the moisture continuously and the steam impregnate can be reclaimed by the cooler.
|Total volume (L)||100||350||500||750||1000||1500||2000|
|Loading volume (L)||≤50||≤175||≤250||≤375||≤500||≤750||≤1000|
|Rotary speed (r/min)||3-13|
|Motor power (kw)||0.75||1.1||1.5||2||3||3||4|
|Rotary height (m)||1.75||2.1||2.25||2.49||2.8||2.94||2.99|
|Tank inner pressure (Mpa)||-0.1-0.15|
|Clip set pressure (Mpa)||≤0.3|
|Working temp.(°C)||Inner tank ≤85 Clip set≤ 140|
|Heating media||Steam, Hot water, Heat transfer oil|
|Floor area (L*W)||2160*800||2260*800||2350*800||2550*1000||2860*1300||3260*1400||
1. Please choose the suitable model according to the primary moisture content, final moisture content, temperature, vacuum degree, and drying time. The heat source can use steam, hot water, thermal oil, and electricity. If the customer required increasing the drying capacity by add more trays, please specify in the order.
2. If the customer required installation or spare parts, please specify in the order.
3. Customized design service available.
4. We guarantee the quality of the dryer and we ensured the spare parts for the dryer is available in a long term.
Features of Rotary Vacuum Dryer
- Design is GMP
- All Product contact parts AISI 316/ 316L & non-contact parts AISI 304. Or completely 304.
- Simple & compact Design for Easy to operate, clean, convenient & user friendly.
- Automated mixing and Drying process in single bowl.
- Dust free operation.
- High vacuum operation
- Low temperature drying.
- Solvent recovery
- Continuous rotation of container, material will make complex impacting motion in the container and reach to uniform mixing and drying at low temperature..
- Continues vacuum maintenance during process.
- Vacuumed closed system with condenser, Receiver for solvent recovery & Cyclone separator to recovery the solid particle.
- Rapid & Complete discharge / Zero holdup after discharge
- The product dried is homogeneous with uniform properties.
- Very low value of final moisture even at low drying temperatures.
- Inside Filter assembly with 5 Micron.