Home ProductsSpray Drying Machine

SUS304 milk powder Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system

SUS304 milk powder Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system

  • SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system
  • SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system
  • SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system
  • SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system
  • SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system
SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system
Product Details:
Place of Origin: CHINA
Brand Name: YIBU
Certification: CE / UL / SGS / EAC / CR – TU
Model Number: LPG
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiation
Packaging Details: Woodencase
Delivery Time: 10 WEEKS
Payment Terms: L/C, T/T
Supply Ability: 20 SETS PER MONTH
Contact Now
Detailed Product Description
Metal Material: SUS316/SUS304/ CARBON STEEL ,ETC Heating Source: Steam / Electrical / Natural Gas / Diesel / Etc
Capacity: 10-10000kg Per Hour Water Evaporation: 5-5000kg Per Hour
Temp: 120-600'C Particle Size: Customized
High Light:

food dryer machine

,

spray drying equipment

LPG Series milk powder  Centrifugal Atomizer Spray Dryer/Egg Powder Extracting Spray Drying Machine /Egg Powder Water Evaporating Dehydrator

 

Working principle and system description:

1,principle of operation

The unit for open cycle, and flow, centrifugal atomization, micro negative pressure operation. After air drying medium, medium efficiency air filters pre-filtered according to the operation instruction by the blower from using high efficient air filter purification after reaching one hundred thousand by steam heater and electric heater into hot air, and then enter the hot air distributor the main drying tower. The liquid material according to the operation instruction through the screw pump into the high-speed rotation of the centrifugal nozzle, under the action of centrifugal force is dispersed into small droplets. The main drying tower, small droplets and hot air in full contact, exchange heat along its path after being dried to become specific products, and then through the cyclone separator separated. The solid material was collected, filtered after gas is discharged.

The receiving system of the unit by the cold air cooling refrigeration dehumidification unique technology advanced material collecting device, which ensure the material from the instant high temperature region to avoid material is softened and cooled, and can avoid the material in high humidity environment such as moisture absorption phenomenon.

2,System description

Primary election: ZLPG-100type(Dia 3800)Polysaccharide spray drying machine set

Heating system: Steam radiator, automatic constant temperature regulation, heating, electric heating compensation

Product collection system: cyclone separation+water film dust removal

Circulation system: send and draw fan open cycle

Air filtration system: primary, medium efficiency, high temperature, high efficiency air filter

Feeding system: screw pump, frequency control, automatic feeding

Blanking system: cold air (dehumidification), air cooling, material receiving, barrel feeding

Cold wall system: cold air jacket, cooling t

 

Performance description and characteristics of spray dryer

1,Feed system

It is composed of screw pump and feed pipe and valve.

The screw pump adopts frequency conversion speed regulation to effectively control the feed quantity. The main part of the pipeline valve is SUS304 stainless steel, and it is clean and sanitary

2,Medium circulation system

It is composed of blower, draft fan, muffler, air regulating butterfly valve and wind pipe

Draft fan and blower are high quality manufacturers supply, cooperation for many years, quality is stable; the blower for SUS304 stainless steel, to ensure clean air; fan with a silencer, effectively reduce the noise. The system volume, wind pressure, wind speed, is the key, based on years of experience, is now mature.

3,Air heating and cleaning system

It consists of early, medium and high temperature HEPA filters, fans, steam radiators, electric heaters, etc.

The heat source is a steam radiator and an electric heater. The material is made of stainless steel pipes and stainless steel fins. The utility model not only ensures the cleanness of the air inlet system, but also has high thermal efficiency and can guarantee the output heat

4,Drying tower system

It is composed of a dry main tower, a hot air distributor, an atomizer, an observation manhole, a tower lighting device, a pneumatic hammer, a lower bin, a cylinder body and a cone jacket, and a cooling system

This system is the core system

1, combined with the test experience, we in the design process of the main tower of the main tower: adjust the straight cylinder height to diameter ratio, adjusted by 0.9:1 routine to about 1.1:1; prolong the retention time of the material, the drying effect is ensured. The adjustment of the taper cone tower, consists of a conventional 60 degree angle adjustment to 54 degrees, fully considering the smooth material in the cone when feeding.

2, the atomizer atomizer using frequency converter to adjust the speed to achieve the best effect. The base will reduce the atomizing atomizer, the atomizing disk atomizer and increase the distance, the droplets in the air can not be returned under the spinning top, in order to ensure the normal operation of the system.

3, design a set of Taneiduo lighting devices and 1 doors, manholes.

4, hot air vortex shell tower by accelerating structure, the hot air in the tower when pressed material effectively, orderly and swirl decreased. Hot air distributor with the characteristics and requirements of the technology, do both sides distributor the wind guiding mechanism, and can adjust the angle, in order to control the hot air into the tower when the tangential angle.

5, the main tower design of jacket cooling cooling system: to avoid the main tower body wall temperature is too high and the receiving effect of the adsorption tower in the cone wall material by high temperature and coking softening phenomenon, ensure the quality of the materials.

5,Product collection system

The utility model is composed of a cyclone separator and a water film dust collector

6,Cold desiccant charging system

It is composed of air filter, freezing dehumidifier, cleaning pipe and so on. The system sends the fresh air to the clean area and collects the cooling air after the filtered fresh air passes through the refrigeration dehumidifier.

7,Other auxiliary system

Are well-known manufacturers of supply, reliable performance; some pipes take into account a certain angle design, the use of suppression stainless steel pipe, to avoid the end material, blocking material, and local resistance is too large, affecting the phenomenon of material delivery.

 

SUS304 milk powder  Centrifugal Atomizer Spray Dryer with steam heating and PLC and HIM control system 0

 

Technical Data

specification LPG
5 25 50 100 150 200-3000
Tep of inlet air less than 350°C
Tep of outlet air 80-90

(kg/h)
Evaporated capacity

5 25 50 100 150 200-3000
Transmitted Compressed air By machine
(rpm)Rotating speed 25000 22000 21500 18000 18000 15000

(mm)
ia. of atomizing disk

50 120 120 120 150 180-340
Heat source Electricity Electricity

+
Electricity+ steam, oil fuel, gas

+ Electricity+ steam + Electricity+ steam, oil fuel, gas Solved by customer

(kw)
Powder of electric heater

9 45 60 81 99  

(%)
Yield of dry powder (%)

≥95 ≥95 ≥95 ≥95 ≥95 ≥95
Installation Size for reference A(mm) 1000 1290 1730 2500 2800 Decided in accordance with actual condition
B(mm) 2100 3410 4245 5300 6000
C(mm) 2300 4260 4645 6000 6700
φ D(mm) 1060 1800 2133 2560 2860
E1(mm) 1050 1200 1640 2100 2180
E2(mm) 1050 1200 1640 2100 2180
F(mm) 750 1000 1250 1750 1970
G(mm) 530 1700 1750 1930 2080
H(mm) 530 1300 1800 2600 3050
I(mm) 530 1550 1600 1780 1960

 

Contact Details
Changzhou Yibu Drying Equipment Co., Ltd

Contact Person: jennywang

Tel: +8613776887793

Send your inquiry directly to us (0 / 3000)

Other Products

Contact

Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)

Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)