|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 SETS PER MONTH|
|Material:||SUS304 SUS316 , CS||LIQUID:||WATER ,PURE WATER ,ACID LIQUID|
clean in place equipment,
clean in place plants
CIP Cleaning System
1. Clean Dairy and Juice and Mineral Waterprocess line
2. Acid+alkali+water tanks
3. Full automatic operation
Our CIP (cleaning in place )system applies an automatic heating method,
Thus to set the cleaning temperature through the temperature controller,
Which means this will limit amount of steam by controlling the open of steam adjusting valves and finally keep the cleaning liquid at appropriate temperature that needed. All liquid levels of CIP tanks are indicated through automatic alarming system to make operation safe and reliable. When concentration is lower than standard it will add concentrated acid and alkali through the air membrane pump, and while cleaning, the transportation of cleaning liquids is performed by manual operating of corresponded pipe valves, and when the tank lacks water, operators should also add more water.
2. Characteristics of CIP (Cleaning In Place) system
1). The automatic cleaning liquid heating system we applied can easily control the cleaning temperature within a scope of technical requirements;
2). The way to add thick acid and alkali with a diaphragm pump strengthened the operational security;
3). Combination of auto-control on temperature and automatic alarming on liquid levels greatly lowers the production cost.
3. Applications of split CIP (Cleaning In Place) system
This cleaning in place (CIP) system we manufacture in China is suitable for large/medium/small-sized food industries.
|Touch screen||Mitsubishi, Siemens, PROFACE|
|Frequency converter||Mitsubishi, Siemens, Danfoss|
|Photoelectric switch||Omron, Keyence, P+F|
◆ After the wide absorption of advanced domestic and foreign technology, and taking the specific conditions and requirements of this industry into consideration, our company develops this simple and easy cleaning equipment. The equipment has proper structure, stable and reliable performance, and is easy to operate. Besides, it is a kind of multi-usage machine, which effectively reduces the labor intensity, optimizes production technology, and meets new version of GMP standard for the state drug production.
The machine consists of water tank, high-pressure pump, water distributor, Angle seat valve, control system, etc. When working, it will connect cleaning components to the cleaning point interface of corollary equipment, you need to set cleaning procedures according to the technological requirements, after confirm, it can clean the lining surface as set progress. It can also connect external high pressure water spray gun, so that the external surface and other accessories can artificially cleaned in cleaning area.
The pumping station is mainly used in the production of solid dosage for the pharmaceutical industry. It can be used together with wet mixing granulator, fluid bed dryer and granulator, fluidized bed coating machine and other ancillary equipment to realize its cleaning function at site. At the same time, it’s widely used in food, chemical industry, etc
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)