|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 SETS PER MONTH|
|Metal Material:||SUS316/SUS304/ CARBON STEEL ,ETC||Heating Source:||Steam / Electrical / Natural Gas Etc|
|Capacity:||50-4000kg/h||Document:||FAT/ IQ / OQ / PQ|
fluid bed equipment,
fluid bed dryer mechanism
1. For drying powder and small granule products in food, chemical and pharmaceutical industry.
2. Drying temperature: 70-140 degree C (adjustable)
3. Evaporation Capacity: 20-300 kg/h
4. Heat supply can be steam,electricity, hot oil, oil/gas/coal/biomass fired hot air generator.
GZQ series vibration fluid bed dryer is a type of fluidized bed where the mechanical vibration enhances the performance of fluidization vibration.
After wet material is evenly fed onto the fluid bed (normally a perforated plate) via the feeding hopper, the strong vibration of dryer body fluidizes the wet material which moves towards the discharging vent. At the same time, hot air is evenly distributed into the drying chamber and flows though the perforated plate. Moisture will be rapidly evaporated with complete contact and heat transfer between hot air and well fluidized wet material. Exhaust fan then will suck out the evaporated moisture. The drying process is continuous and cooling air can be introduced to cool the dried product to required temperature.
GZQ series vibration fluid bed dryer has been widely used in food, chemical and pharmaceutical industry for drying/cooling powder and granule (0.05-5mm) products with surface water.
1. Wide applications:It is successfully used on all types of powders, agglomerates, granulates, especially those which fluidize poorly due to a broad particle size distribution. The fluid bed can be operated as a single drying or cooling unit - often associated with a spray drying system.
2. Energy-saving: Due to strong mechanical vibration, wet material can be perfectly fluidized and move forward with slow air flow velocity. Energy consumption is much lower than normal fluid bed dryer.
3. Adjustable residence time: Different residence time of wet material in drying chamber can be achieved by regulating the angle of vibration motors to meet different drying requirements in moisture.
4. Easy operation and maintenance: The whole drying system is highly automatic. The simple but practical design can not only reduce production cost but also the maintenance and repair cost.
It is applicable for drying, cooling of powder or granule state materials, such as citric acid, monosodium glutamate, borax, ammonium sulphur, compound fertilizer, piece of radish, bean, lees, seed, mine reside and sugar, in chemical, pharmaceutical, foodstuff, grain, mine and so on industries.
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)