|Place of Origin:||CHINA|
|Certification:||CE / UL / SGS / EAC / CR – TU|
|Minimum Order Quantity:||1 set|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 SETS PER MONTH|
|Material:||SUS304 SUS316 , CS||LIQUID:||WATER ,PURE WATER ,ACID LIQUID|
mobile cip unit,
clean in place plants
1, the introduction of CIP:
CIP cleaning system has been widely used in in situ beverage, dairy, juice, wine and other food production enterprise with high mechanization degree.CIP Cleaning (Cleaning In Place) equipment (tank. Pipe. Pump, etc.) and the entire production line without artificial apart or turn on the premise, In the closed loop circulation Cleaning. Disinfection.In situ or CIP cleaning, say again in clean or automatic cleaning.In situ cleaning means not apart or mobile device, which USES high temperature and high concentration of fluid to clean, strong effect on equipment, and food contact surface to wash of the method.CIP can guarantee certain cleaning effect, improve the safety of products, to avoid the cross infection between batches;Save operation time and improve efficiency;Saving labor and ensure the safe operation;Save energy such as water, steam, reducing the dosage of detergent;Can realize large-scale production equipment, high automatic level;Prolong the service life of production equipment.
2, CIP cleaning system in situ features:
2.1, CIP cleaning system for economic operation of the low cost, compact structure, cover an area of an area small. Installation. Maintenance is convenient, can effectively to tanks and other production equipment, tank containers and pipes in-place cleaning, the whole cleaning process are in tight production equipment, cylinder and tank containers and pipes, so as to minimize the secondary pollution.
2.2, the system can be divided into according to the production all the way to four channels.Dragon is more than 2 and 2, both can partition cleaning the same or more than two area, at the same time can also be in the process of production production while cleaning.When the production so will shorten the time of the CIP cleaning.
2.3, using the United States imported pneumatic diaphragm pump suction strong acid, strong alkali, not only improve the integrity rate of the equipment and reduces the rate of equipment maintenance, more major is to reduce the running cost.
2.4, extracorporeal circulation system, which can effectively reduce energy consumption.
2.5, water system, which can effectively reduce the CIP water.
2.6 hot water system, medium.
2.7, especially automatic CIP, to automatically detect. Cleaning fluid charging. Emissions. Display and adjust, for its reliable operation, high automation, simple operation, good cleaning effect, thus more accord with modern large-scale fluid medicine. The sanitary standards of food processing technology and production requirements.
2.8, the stability of the CIP cleaning in position, man-machine interface with the image display.
2.9, automatic switching process parameters, automatic adjusting the parameters of the cleaning time, PH, temperature, etc.
2.10, can choose manual control or automatic control two operation modes.
2.11, all operations are records for GMP certification.
2.12, CIP cleaning system has a single pot double tank and tank for the user to choose from, more mobile and stationary.
3, CIP cleaning system main application range from Royal Pharm
The food industry, pharmaceutical industry, beverage industry, daily chemical industry CIP cleaning instructions
3.1, foreword in-place Cleaning (CIP Cleaning in Place) is a new type of effective Cleaning technology, widely used in the dairy, can also be used for beer, soft drinks, coffee, sugar, pharmaceutical and other industries .In-place cleaning technology is in equipment, pipeline, valve is no need to remove don't need a change of circumstances, the equipment is in place for cleaning of a technology, it has the following features:
1) on the clean, simple operation, work safety, low labor intensity, high work efficiency.
2) clean thoroughly, and can also achieve disinfection sterilization, guarantee the health requirements, is helpful to improve product quality.
3) to clean the road, can workshop covers an area of less.
4) detergent can be recycled, high utilization, also compare save steam and water.
5) less wearing parts, the equipment service life is long.
6) is suitable for large, medium and small equipment cleaning.
7) cleaning can realize automation and stylized.
3.2, purpose and characteristics of this equipment is used for large and medium-sized dairy centralized control. Its characteristic is acid tank, alkali liquor tank and clear water tank respectively by independent of three tank, so called tank on-site cleaning equipment. This equipment has the following features:
1) with a distributor for multiple cleaning, respectively.
2) has the return piping equipment, lotion can be recycled, save a lotion, and good sanitation.
3) storage tank size, control mode can be set according to user requirements.
Selected according to process technology: single tank type, double tanks type, separate body typeasol choice: intelligent and manual
At present, intelligentized CIP system is widely used in biological fermenting and pharmaceutical industries with high requirement of clean so that it teaches sanitary and sterilization effect.
◆ After the wide absorption of advanced domestic and foreign technology, and taking the specific conditions and requirements of this industry into consideration, our company develops this simple and easy cleaning equipment. The equipment has proper structure, stable and reliable performance, and is easy to operate. Besides, it is a kind of multi-usage machine, which effectively reduces the labor intensity, optimizes production technology, and meets new version of GMP standard for the state drug production.
The machine consists of water tank, high-pressure pump, water distributor, Angle seat valve, control system, etc. When working, it will connect cleaning components to the cleaning point interface of corollary equipment, you need to set cleaning procedures according to the technological requirements, after confirm, it can clean the lining surface as set progress. It can also connect external high pressure water spray gun, so that the external surface and other accessories can artificially cleaned in cleaning area.
The pumping station is mainly used in the production of solid dosage for the pharmaceutical industry. It can be used together with wet mixing granulator, fluid bed dryer and granulator, fluidized bed coating machine and other ancillary equipment to realize its cleaning function at site. At the same time, it’s widely used in food, chemical industry, etc
Contact Person: jennywang
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Factory Address:NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)